DJLab.3
The DJLab.3 raises the bar in DJ packages by including the T.80 high-torque direct-drive turntable.
The complete Stanton DJLab.3 starter pack’s tables are capable of delivering enough torque to please both mix and skratch DJs alike. DJLab.3 comes with 2 T.80 high-torque direct-drive turntables with slipmats and dust covers, plus straight tonearms for superior tracking when skratching, unique digital features like Key Lock (Master Tempo) and S/PDIF output, 3 playback speeds (33, 45, 78rpm), quartz lock, target light, and pitch control with selectable range (±8%, 12%). DJLab.3 also includes 2 – 500B cartridges mounted on headshells; an M.202 compact 2-channel mixer with long-lasting crossfader, 2-way crossfader curve control, 2 selectable phono/line inputs, a mic input, and Fader Start outputs for use with compatible CD players; DJ PRO 80 headphones; and all cables.
Stanton DJLab.3 DJ Pack Features:
- 2 T.80 high-torque direct-drive turntables with slipmats and dust covers
- 2 500B cartridges mounted on headshells
- M.202 2-channel mixer
- DJ PRO 80 headphones
- All cables
click Underline Model above for more info.
T.80
| Turntable Section |
Measurement |
| Frequency Response |
30 Hz to 20 kHz +1/- 2 dB/ RIAA filter |
| THD+N |
< 0.03% at 1 kHz |
| S/N Ratio: Line |
<-65 dB |
| Digital Output (SPDIF) |
0.5Vp-p (Load 75 ohms) |
| Type |
3-speed full manual |
| Motor |
8 pole, 3 phase, brushless DC motor |
| Speeds |
33 1/3 and 45rpm and 78 rpm |
| Wow and Flutter |
Less than 0.15% WRMS (JIS WTD) with 33 1/3 rpm |
| Pitch Controls |
+/- 8%, +/-12% |
| Starting Torque |
More than 1.6 kgf.cm |
| Starting Time |
Less than 1 sec with 33 1/3 rpm |
| Braking Time |
Less than 1 sec with 33 1/3 rpm |
| Braking System |
Electronic Brake |
| Pitch Bend |
+/- 6% |
| Time for Speed Change |
Less than 1 sec with 33 1/3 rpm
Less than 1 sec from 45 to 33 1/3 rpm
Less than 1 sec from 33 1/3 to 78 rpm |
| Audio Output |
Phono/Line output |
| Tone Arm Section |
Measurement |
| Tone arm type |
Static balanced straight shaped tone arm with cardan’s suspension |
| Effective Arm Length |
191mm |
| Tracking Force Range |
0-3g |
| Applicable Cartridge Weight |
6-10g |
M.202
| Description |
Measurement |
INPUT / OUTPUT IMPEDANCE & SENSITIVITY
Line
Phono
Mic
Master
Phones |
-14dB/10K OHM ±2dB
-50dB /47K OHM ±2dB
-60dB /2.2K OHM ±2dB
1K OHM
0dB/33 OHM ±2dB (LOAD=32 OHM) |
MAX. OUTPUT (THD=1%)
Master |
MORE THAN +14dBV (8.0V) |
| CHANNEL BALANCE |
WITHIN 3dB |
| FREQUENCY RESPONSE: (line) |
20-20KHz ±2dB |
| OUTPUT NOISE (IEC-A WEIGHTED) (line to MST) |
LESS THAN -90dBV |
| THD + N: (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF) (line) |
LESS THAN 0.05% 20 – 20KHz |
| Crosstalk |
LESS THAN -80dB AT 1KHz BETWEEN CHANNELS. (TERMINATED UNUSED INPUTS) |
| Signal to Noise Ratio |
<106dB |
Mic EQ
hi
Low |
±10 +/- 2dB AT 10KHz
±10 +/- 2dB AT 100Hz |
| Channel EQ |
Hi 9 +/- 2dB AT 13KHz -15 +/- 3dB AT 13KHz
Mid 9 +/- 2dB AT 1KHz LESS THAN -23dB AT 1KHz
Low 9 +/- 2dB AT 70Hz -26 +/- 3dB AT 70Hz |
| Inputs/Outputs |
| Line Inputs |
2 (RCA), -10dB/47K ohm |
| Phono Inputs |
2 (RCA), -50dB/47K ohm |
| DJ Mic Input |
1 (1/4″), -50dB/6K ohm |
| Master Output |
1 (RCA), -10dB/47K ohm |
| Headphone Output |
1 (1/4″), -3dB/33 ohms |
| Mic Tone |
+/-10dB (Hi, Low) |
| Dimensions (LxWxD) |
230 (W) X 267 (D) X 111 (H) mm |
| Weight |
1.61Kgs (3.5 lbs.) |